HOME>PRODUCTFully Continuous>15T Fully Continuous Waste Tyre(Plastic) Pyrolysis Plant

15T Fully Continuous Waste Tyre(Plastic) Pyrolysis Plant

●  Rotate pyrolysis reactor with anti coking design. No coking problem.
●  Adopt multilevel cooling design, to get more fuel oil.
●  Hot air heat, cooperated with low temperature pyrolysis catalyst, extend working life of plant.
●  Enclosed production all the way, no leakage and no dust loss, environmental protection.
●  Exhaust gas multistage processed, gas emission reach European Standard level.

Consult Contact
Advantage

1.Technological Process
(1) Broken tyre transported to feeder firstly by conveyor, then to reactor.
(2) Oil and gas from pyrolysis go into gas-liquid separating tower and separate, and enter into condenser to liquify , to get fuel oil, then enter into oil storage tank.
(3) Coarse carbon black and steel wire from pyrolysis are output by automatic slag remover, transported to carbon black processing system by cooling hoist. Separate steel wire and carbon black through the magnetic separator,to get industrial carbon black and steel wire.
(4) Shatter carbon black, to get industrial carbon black after deeply processing. Steel wire compressed into a piece of scrap processing.
(5) Flammable gas enter into waste gas process tank to desulfur. Then extracted by vacuum pump, enter into water sealed tank and send to hot air furnace.
2. Main Performance Parameter

Item 15 T fully continuous waste tyre pyrolysis plant
Type XFLJ–15
Capacity 15T/D
Operating temperature ≤650°
Material Q345R
Fuel consumption in start 300 kg
Fuel consumption in operation 0 (the syn gas from the system be burnt by the system itself)
Heating way Hot air circulation heating
Tire requirement Tyre piece ≤20mm
Working pressure Normal pressure
Methods of flame retardant Nitrogen Blow
Total power 90 kw
Running power 80 kw/h
Boundary dimension 14000mm(L) × 2400mm(W) × 4000mm(H)
Floor space 36000 mm ×3500 mm
The highest install elevation 7000 mm
Labor 1-2 people
Working life 10 years

Remark: This parameter is just for reference. Size change caused by design improvement will not inform customers specially. Please refer to documents e

MESSAGE BOARD

No Job Opportunity